STMicroelectronics LPS25HB Element

The LPS25HB element is used to measure barometric pressure. This element is for using the STMicroelectronics LPS25HB piezoresistive absolute pressure sensor.

The LPS25HB element is a sensor element that can be imported into the Element Toolbox through the Add Element Add Element button located in the toolbox from the Embedded tab.


The following properties can be changed for the LPS25HB element:


The name of the element.

I2C Driver Instance

The I2C bus used to communicate with the sensor.

I2C Address

The I2C address the element sends data to.


The following triggers are available to execute events from within the LPS25HB element:


Execute an event when the source element connected to the LPS25HB triggers.

Pressure Read

Execute an event when pressure data is read. Pressure data will be float hPa.

Temperature Read

Execute an event when temperature data is read. Temperature data will be float (in Celsius).


The following abilities are available for the LPS25HB element when its source element triggers:


Trigger the element(s) that follow the LPS25HB element.

Read Pressure (hPa)

Read the sensor’s pressure data.

Read Temperature (°C)

Read the sensor’s temperature data.