Seeed Studio Grove PIR Motion Element
The Grove PIR motion element is used to detect motion. This is for using the Seeed Studio Grove PIR Motion Sensor.
The Grove PIR motion is a sensor element that can be imported into the Element Toolbox through the Add Element button located in the toolbox from the Embedded tab.
The following properties can be changed for the Grove PIR motion element:
The name of the element.
GPIO Driver Instance
The GPIO driver instance number to use.
The GPIO pin used for detecting motion.
The following triggers are available to execute events from within the Grove PIR motion element:
Execute an event when the source element connected to the Grove PIR motion triggers.
Execute an event when motion is detected.
The following abilities are available for the Grove PIR motion element when its source element triggers:
Trigger the element(s) that follow the Grove PIR motion element.
Check for the current state of motion detection.
Atmosphere includes a selection of resources for users of all levels that demonstrate using the Grove PIR motion element.
To view the Grove PIR motion element used within a project, click the demo’s name to open the project in Atmosphere and see how the element is set up.
|Grove PIR Motion Demo||BeagleBone Green||Demonstrates using the Grove PIR Motion Sensor on a BeagleBone Green to detect motion. If motion is detected, data will print on a debug console.|