Seeed Studio Grove Button Element
The Grove button element is used to detect if a button is pressed. This is for using the Seeed Studio Grove Button Sensor.
The Grove button is a sensor element that can be imported into the Element Toolbox through the Add Element button located in the toolbox from the Embedded tab.
The following properties can be changed for the Grove button element:
The name of the element.
GPIO Driver Instance
The GPIO driver instance number to use.
The GPIO pin used for detecting whether the button is pressed.
The following triggers are available to execute events from within the Grove button element:
Execute an event when the source element connected to the Grove button triggers.
Execute an event when the button is pressed.
The following abilities are available for the Grove button element when its source element triggers:
Trigger the element(s) that follow the Grove button element.
Atmosphere includes a selection of resources for users of all levels that demonstrate using the Grove button element.
To view the Grove button element used within a project, click the demo’s name to open the project in Atmosphere and see how the element is set up.
|Grove Button and Buzzer Demo||BeagleBone Green||Demonstrates using the Grove Button and Buzzer sensors on a BeagleBone Green to beep the buzzer when the button is pressed.|
|Grove Button and Temperature Demo||BeagleBone Green||Demonstrates using the Grove Button and Grove Temperature Sensor on a BeagleBone Green to read temperature data when the button is pressed, then send that data to the cloud.|