MikroElektronika IrThermo Click Element

The IrThermo click element is used to measure infrared temperature. This element is for using the MikroElektronika IrThermo Click board.

The IrThermo click is a sensor element that can be imported into the Element Toolbox through the Add Element button located in the toolbox from the Embedded tab.

Properties

The following properties can be changed for the IrThermo click element:

Name

The name of the element.

I2C Driver Instance

The I2C bus used to communicate with the board.

I2C Address

The I2C address the element sends data to.

Triggers

The following triggers are available to execute events from within the IrThermo click element:

Triggered

Execute an event when the source element connected to the IrThermo click triggers.

Temperature Read

Execute an event when temperature data is read.

Abilities

The following abilities are available for the IrThermo click element when its source element triggers:

Trigger

Trigger the element(s) that follow the IrThermo click element.

Read Temperature

Read the temperature data.

---